Mercury-marine Sport 899183001 Manuel d'utilisateur télécharger pdf (Page 36)

MAINTENANCE

Cleaning Procedure

NOTE: Gasoline spillage must be cleaned immediately to prevent

damage to fabric. Remove the floorboards to clean the gasoline

spillage from the floor fabric.

1. Deflate the boat and remove the floorboards.

2. Reinflate the air chambers

3. Open the drain valve. Use a hose to wash out any debris from

the interior, especially around the area where the floor meets

the air chambers. Clean any debris from the drain valve.

4. Clean both the exterior and interior with a mild soap and fresh

water solution.

5. Rinse with fresh water and dry thoroughly.

IMPORTANT: Do not use a vinyl preservative on the air chamber

fabric. Chemicals in the preservatives may dry out the fabric.

Deflating

IMPORTANT: When deflating the side air chambers, do not deflate

one side air chamber at a time. When deflating, maintain a

balanced air pressure between air chambers to prevent stress or

potential damage to the inside diaphragms that separate the air

chambers.

14778

a - Valve stem

b - Closed position

c - Open position

d - Valve cap

1. Unscrew the valve caps by turning a quarter turn

counterclockwise.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Mercury-marine Sport 899183001 Manuel d'utilisateur Page 36